Single-Colour LED Dimmer 12-48V DC Max 10A - Black

Single-Color LED Dimmer 12-48V DC Max 10A - Black

Take control of your single-color LED strips with this black tempered glass touch wall dimmer. Powered by 12-48V DC, it controls up to 288W of LED strips via two output channels (5A per channel at 12-24V). Its central touch dial provides precise brightness adjustment across 10 levels, and its 4 scene buttons save your favorite settings. Compatible with an optional 2.4GHz RF remote control for remote operation. CE RED certified, with a 5-year warranty.

Technical details

• Type: Touch wall dimmer for single-color LED strips
• Input voltage: 12-48VDC
• Output voltage: 2 x (12-48)VDC
• Output current: 2CH, 5A/CH at 12-24V / 3A/CH at 36-48V
• Power: 120-288W
• Output type: Constant voltage
• Compatible lighting type: Single-color
• PWM frequency: 1000/2000/8000/16000Hz (adjustable via DIP switch — choose a higher frequency if you film your spaces to eliminate visible flicker on camera)
• Dimming levels: 10 levels
• Communication: 2.4GHz RF (wireless radio signal, compatible with optional remote control sold separately)
• Protection rating: IP20 (indoor)
• Operating temperature: -30°C to +55°C
• Dimensions: 86 x 86 x 33 mm
• Certification: CE RED
• Warranty: 5 years

Features

• Highly responsive tempered glass surface with built-in backlighting — the panel responds to the slightest touch
• Touch brightness dial in the center of the panel for intuitive adjustment
• 4 programmable scene buttons: save your favorite settings and recall them instantly
• The DIP switch on the back lets you select the PWM frequency (1000/2000/8000/16000Hz) to suit your needs
• Pair a 2.4GHz RF remote control (sold separately) to operate the dimmer without leaving your chair, from up to 30 m away
• Elegant black finish

Installation & wiring

This dimmer fits a standard 86x86 mm wall box (European standard). Connect the low-voltage power supply (12-48VDC) to the input terminals and the LED strip to the output terminals. To pair a remote control, briefly press the Match button, then activate the remote's on/off button. To unpair: hold Match for 5 seconds.

Where can you use this LED dimmer?

Suitable for all single-color LED strips and bars operating on constant voltage: indirect lighting for coves, under cabinets, display cases, false ceilings, stairs, or signs. Smooth dimming and saveable scenes are ideal for both residential interiors and professional spaces.