Single-Colour RF LED Controller Kit 5-36V DC Max 8A with Remote - White

RF Single-Color LED Controller Kit 5-36V DC Max 8A with Remote Control - White

Control your single-color LED strips wirelessly with this receiver kit + compact CR2032 remote control. The receiver accepts a voltage of 5 to 36V DC and handles up to 288W on an 8A channel. The remote control features a touch wheel for adjusting brightness with a resolution of 4096 levels, 3 scene memories, 4 quick brightness settings (25/50/75/100%) and a Push-Dim input (short press = on/off, long press = gradual dimming) for a wired push-button switch. Certified CE RoHS FCC, backed by a 5-year warranty.

Technical details

• Type: RF controller kit + compact remote control for single-color LED strips
• Input voltage: 5-36VDC
• Output voltage: 5-36VDC
• Output current: 1CH, max 8A
• Power: 40-288W
• Output type: Constant voltage
• Compatible lighting type: Single-color
• PWM frequency: 2000Hz (pulse-width modulation for precise brightness control without altering the color)
• Dimming levels: 4096 levels (12 bits)
• Dimming range: 0-100%
• Communication: RF 2.4GHz, 30m range in open space
• Push-Dim input: Yes (lets you dim the light using a simple wired push-button switch, without a remote control)
• Protection rating: IP20 (indoor)
• Operating temperature: -30°C to +55°C
• Receiver dimensions: 97 x 33 x 18 mm
• Certification: CE RoHS FCC
• Warranty: 5 years

Features

• 4096-step resolution with a logarithmic curve: dimming follows the eye’s natural perception, with imperceptible transitions even at very low brightness levels
• Touch wheel on the remote control, with 4 brightness shortcuts (25/50/75/100%)
• 3 storable scenes: save your favorite setting and recall it with a single press
• LThe Push-Dim input integrated into the receiver accepts a standard push-button switch: briefly press to turn on/off, press and hold to dim.
• Built-in protection against reverse polarity, overheating, overload, and short circuits, with automatic recovery — keeping your installation safe

Installation & wiring

Connect the power supply to the receiver’s INPUT terminals (+/-) and the LED strip to the OUTPUT terminals. To pair the remote control: briefly press the receiver’s Match button, then press the remote’s on/off button. To unpair: hold Match for 5 seconds.

Where can you use this LED controller kit?

This kit is designed for all constant-voltage, single-color LED strips and bars: indirect lighting for coves and false ceilings, highlighting display cases, under-cabinet kitchen lighting, staircases, and signs. Ultra-fine dimming and customizable scenes make it suitable for both residential interiors and commercial spaces.