Black Three-Phase LED Track Kit + 4 GU10 Spotlights - 200 cm
Black profile and three-phase power supply for projects where the track needs to remain discreet while allowing circuit-based zoning. This item includes two meters of track, four adjustable holders and the four corresponding GU10 lamps.
What's included
- 1 black 2 m three-phase track
- 4 black adjustable spot holders
- 4 GU10 9,5 W LED lamps (880 lm), supplied in the ordered color temperature
- Screws, ceiling mounts and track end caps included
Each track section comes with its power connector and end caps: no additional accessories are needed to power the track.
Technical details
- Total power: 38 W (4 x 9,5 W)
- Total luminous flux: 3520 lm (4 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 266W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 36°
- Color rendering: Ra 80
- Protection rating: IP20 (dry indoor locations)
- Total track length: 200 cm
- Lamp lifespan: ~25000h
- Lamp energy class: F
- Class I — CE & RoHs certification — 2-year warranty
Features
The three-phase track provides three independent circuits on a single profile. Each fixture can be positioned on the desired circuit when clipped in, allowing general and accent lighting to be separated without running an additional line.
The 4 holders are adjustable: each head swivels and tilts to direct the beam toward a façade, display stand or work surface. They slide freely along the entire length of the track, allowing you to rearrange them without tools when changing the display.
The supplied GU10 bulbs can be replaced like standard bulbs: the installation’s color temperature or power level can be changed without replacing the holders or track. Replacing bulbs individually reduces the spare-parts stock that needs to be kept on site.
Please note: the supplied bulbs are not dimmable. To adjust the brightness, replace them with dimmable GU10 bulbs and use a compatible dimmer — the track and holders can stay in place.
Installation
The track can be surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections connect using the included connectors, then the track is connected to the 220 - 240V mains using the power connector supplied with the track.
LInstallation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the distribution board before making any connections and check the continuity of the earth connection: the system is Class I.
Where should you use this track lighting kit?
Restaurants, hotels, seminar rooms and event spaces: the black profile blends into dark ceilings, while the three circuits let you switch from service mode to evening mode without modifying the installation.
