White Three-Phase LED Track Kit + 4 GU10 Spotlights - 200 cm
L'three-phase power opens three independent circuits on a single line: the four included heads are distributed across separate controls according to the selected zoning. Two meters of track, four supports, and four GU10 lamps make up the complete supply.
What's included
- 1 white 2 m three-phase track
- 4 white adjustable spot heads
- 4 GU10 9.5 W LED bulbs (880 lm), supplied in the selected color temperature
- Screws, ceiling mounts, and track end caps included
Each track section comes with its power connector and end caps: no additional accessories are needed to power the track.
Technical details
- Total power: 38 W (4 x 9.5 W)
- Total luminous flux: 3520 lm (4 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 266W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 36°
- Color rendering: Ra 80
- Protection rating: IP20 (dry indoor areas)
- Total track length: 200 cm
- Lamp lifespan: ~25000h
- Lamp energy class: F
- Class I — CE & RoHS certified — 2-year warranty
Features
The three-phase track provides three independent circuits on a single profile. Each fixture connects to the desired circuit when clipped into place, allowing general and accent lighting to be separated without running an additional line.
The 4 holders are adjustable: each spotlight head swivels and tilts to direct the beam toward a façade, display or work surface. They slide freely along the entire length of the track, allowing you to rearrange them without tools when changing the merchandising layout.
The supplied GU10 bulbs can be replaced like standard bulbs: you can change the installation’s color temperature or power level without replacing the holders or track. Replacing bulbs individually also reduces the spare-parts stock you need to keep on site.
Please note: the supplied bulbs are not dimmable. To adjust the light intensity, replace them with dimmable GU10 bulbs paired with a compatible dimmer—the track and holders can stay in place.
Installation
The track can be surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections connect using the included connectors, and the track is then connected to the 220 - 240V supply using the power connector provided.
L’installation must be carried out by a qualified electrician in compliance with NF C 15-100. Switch off the power at the electrical panel before making any connections, and check earth continuity: the system is Class I.
Where can you use this track lighting kit?
Retail corners, showrooms, offices and reception areas: the three circuits make it possible to dedicate one circuit to end caps while keeping the general lighting independent, all on the same two-metre track.
