Product description
⚠️ The power cable is not included with this strip: it must be ordered separately.
220V tunnel LED strip, 50 m roll, connectable up to 250 m in series
The 50 m roll halves the number of joints along a given run compared with shorter packaging, reducing both potential weak points and connection time on underground projects or in parking garages. The principle remains the same—connect end to end up to 250 m from a single 220V power supply, with no driver or power cable to run—with an alternating pattern of 1 m with LEDs and 1 m without LEDs that spreads the light without increasing the installed wattage. The IP65, UV-resistant PVC jacket withstands moisture, dust, and sun exposure in outdoor areas.
Technical details
- 50 m roll, connectable up to 250 m from a single power supply point
- Alternating 1 m illuminated / 1 m without LEDs along the entire length
- Direct 220-240V power supply, no driver or power supply unit required
- 9W per illuminated meter, or 234W for the complete roll
- 120 LEDs per meter on equipped sections, Ra 90
- IP65 protection against rain and dust
- Can be cut every meter at the designated marks
- Flexible, durable, UV-resistant PVC jacket
Features
- Half as many joints as with shorter packaging over the same run
- A single power supply point can cover up to 250 m
- No power supply box to install or maintain along the route
- Flexible enough for curves, returns, and changes in surface elevation
- Ra 90 for faithful reproduction of markings and signage
Installation
Unroll the coil along the mounting surface, secure the strip with clips or in a profile, then connect the power cable end to 220-240V. Connect the rolls end to end up to a maximum of 250 m before connecting the assembly to the single power supply point. Cut only at the marks, every meter; seal the free end with an end cap. Perform all work with the power off.
Where can you use this tunnel LED strip?
- Tunnels, technical galleries, and long underground networks
- Covered parking garages, ramps, and traffic lanes
- Marking walkways and logistics platforms
- Outdoor structures, cornices, and long façades
- Temporary installations and construction site facilities
Technical specifications
Light source
| Power | 225W |
| Luminous efficacy | 64 lm/W |
| Luminous flux | 15050 lm |
| Colour temperature | Blanc Chaud (2300K - 3500K) |
| LED type | SMD2835 |
| LEDs per metre | 120 |
| IRC | Ra 90 |
| Incandescent equiv. | 1238W |
| Beam angle | 120° |
| Dimmable | Oui |
Electrical
| Voltage | 220 - 240V |
| Current type | AC |
| Power supply | Secteur |
| Frequency | 50-60Hz |
| Energy class | G |
| Electrical Insulation Class | Classe II |
Dimensions
| Dimensions | 5000 x 1,8 x 0,7 cm |
| Length | 5000 cm |
| Width | 1,8 cm |
| Thickness | 0,7 cm |
| Cuttable | 1 m |
Installation
| Ingress protection | IP65 |
| Dimmer | Oui |
Product
| Materials | PVC |
| Certifications | CE & RoHs |
| Warranty | 2 ans |
| Lifespan | ~20000h |
| Operating temp. | -20°C à +40°C |
Downloads
Find all the technical documentation and the declaration of conformity for this product.
Technical documentation (3)
Compliance (1)
Complete your order
Accessories and products compatible with this item.
Similar products
Our customers also liked these products.
Explore related categories7
Browse the ranges this product belongs to.
Questions & answers
Our technical team answers our customers' questions.
Thank you, your question has been sent.
Our technical team will reply by email.
No questions yet.
Need a technical detail before ordering? Our technical team will reply by email.
Recently viewed
Products you viewed recently.









