U-Shaped Single-Phase LED Track Kit + 14 Black GU10 Spotlights - 800 cm
Fourteen heads spread across eight meters of black track on a single circuit: the U-shaped configuration fits above a kitchen island or around the edge of a countertop. All connecting hardware is included, including the two 90° corners and two straight connectors.
What’s included
- 3 black 2 m single-phase tracks
- 2 black 1 m single-phase tracks
- 2 black single-phase straight connectors
- 2 black single-phase 90° corner connectors
- 14 black adjustable spotlight holders
- 14 LED GU10 9,5 W bulbs (880 lm), supplied in the selected color temperature
- Screws, ceiling mounts and track end caps included
Each track section comes with its power connector and end caps: no additional accessories are needed to power the track.
Technical details
- Total power: 133 W (14 x 9,5 W)
- Total luminous flux: 12320 lm (14 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 798W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Lighting angle: 80°
- Color rendering: Ra 80
- Protection rating: IP20 (dry areas)
- Total track length: 800 cm
- Lamp lifespan: ~25000h
- Lamp energy rating: F
- Class I — CE & RoHS certified — 2-year warranty
Features
The single-phase track groups all the supports on one circuit: the entire line switches on and off from a single control point. This is the quickest configuration to connect when the electrical panel has only one lighting circuit.
The 14 holders are adjustable: each head swivels and tilts to direct the beam toward a facade, display stand, or work surface. They slide freely along the entire length of the track, allowing them to be repositioned without tools when the merchandising layout changes.
The supplied GU10 bulbs can be replaced like standard bulbs: the color temperature or power level of the installation can be changed without replacing the holders or track. Replacing individual bulbs limits the spare parts that need to be kept on site.
Please note: the supplied bulbs are not dimmable. To adjust the light intensity, replace them with dimmable GU10 bulbs paired with a compatible dimmer—the track and holders can stay in place.
Installation
The track can be surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections connect with the included connectors, then the track is connected to the 220 - 240V supply using the power connector supplied with the track.
LInstallation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the panel before making any connections and check earth continuity: the system is Class I.
Where can you use this track lighting kit?
Dining areas, reception halls, technical platforms: the eight-meter U shape frames a central island or perimeter walkway. Centralized control is compatible with an existing switch, with no need to add a circuit at the panel.
