U-Shaped Three-Phase LED Track Kit + 14 Black GU10 Spotlights - 800 cm
Eight meters of U-shaped black track, fourteen adjustable heads and three separate circuits: the most complete format for fitting out a retail floor or exhibition hall with a single product.
What's included
- 3 black 2 m three-phase tracks
- 2 black 1 m three-phase tracks
- 2 black three-phase straight connectors
- 2 black three-phase 90° corner connectors
- 14 black adjustable spotlight fixtures
- 14 LED GU10 9.5 W bulbs (880 lm), supplied in the ordered color temperature
- Screws, ceiling mounts and track end caps included
Each section comes with its power connector and end caps: no additional accessories are needed to power the track.
Technical details
- Total power: 133 W (14 x 9.5 W)
- Total luminous flux: 12320 lm (14 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 798W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 36°
- Color rendering: Ra 80
- Protection rating: IP20 (dry indoor areas)
- Total track length: 800 cm
- Lamp lifespan: ~25000h
- Lamp energy class: F
- Class I — CE & RoHS certified — 2-year warranty
Features
The three-phase track provides three independent circuits on a single profile. Each fixture is positioned on the desired circuit when clipped into place, making it possible to separate general lighting from accent lighting without running an additional cable.
The 14 holders are adjustable: each head swivels and tilts to direct the beam toward a facade, display stand, or work surface. They slide freely along the entire length of the track, allowing them to be repositioned without tools when the merchandising layout changes.
The supplied GU10 lamps can be replaced like standard bulbs: the installation’s color temperature or power level can be changed without replacing the holders or track. Replacing individual lamps limits the spare parts that need to be kept on site.
Please note: the supplied lamps are not dimmable. To adjust the light intensity, replace them with dimmable GU10 lamps paired with a compatible dimmer—the track and holders remain in place.
Installation
The track is surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections connect using the included connectors, then the track is connected to the 220 - 240V mains using the power connector supplied with the track.
L's installation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the distribution board before making any connections and check the continuity of the earth connection: the assembly is Class I.
Where should you use this track lighting kit?
Sales floors, exhibition halls, multipurpose rooms, and large reception areas: the eight-meter U-shaped loop handles a complete volume. The three circuits offer the control flexibility expected in public buildings over extended operating hours.
