220V 360W Recessed Rotary Wall TRIAC Dimmer, 2.4G RF Compatible
This 360W rotary wall TRIAC dimmer is a recessed phase-cut dimmer designed for dimming dimmable LEDs, TRIAC drivers, halogen lamps, and incandescent lamps on a 100-240V AC supply. It installs in place of a standard switch, with no transformer or additional control wiring required, and includes a 2.4GHz RF module for remote control using a compatible Skydance remote (not included).
Technical specifications
-
Input voltage: 100-240V AC, 50/60 Hz
-
Output: 1 channel, max. 1.5A
-
Maximum power: 150W at 100V, 360W at 240V
-
Dimming mode: leading-edge or trailing-edge phase-cut, selected via DIP switch
-
Local control: rotary knob (turn to dim, short press for on/off, long press for continuous dimming)
-
Dimming range: 0-100%, 256 levels, flicker-free
-
Minimum brightness threshold: adjustable via button
-
Functions: soft start, last-level memory
-
Protections: overheating and overload, with automatic reset
-
Remote control: compatible with Skydance single-color, single-zone or multi-zone 2.4G RF remote controls (not included), up to 10 paired remotes, range up to 30 m
-
Format: recessed 86 x 86 mm, depth 51.5 mm
-
Standards: CE, RoHS
-
Warranty: 5 years
Benefits for installers
The DIP switch cut-off mode setting lets you adapt the dimmer to the actual load on site: trailing edge for most LEDs and electronic drivers, leading edge for inductive loads or certain transformers. The adjustable minimum brightness threshold eliminates flickering at the lower end of the dimming range, a common source of customer complaints with LED renovations. Soft start limits inrush current at switch-on and protects the light sources, while last-level memory ensures consistent operation after a mains outage. During setup, an RF remote control can be paired in seconds, with no programming or gateway required.
Installation
- Install in a standard flush-mount box, directly replacing an existing switch
- Connect to the 100-240V AC mains circuit, with no external power supply
- Set the leading / trailing edge mode using the DIP switch before powering on
- Size the load based on the power consumed by the luminaires or drivers (not their output power), up to 360W at 240V
- Optionally pair one or more Skydance RF 2.4G remote controls using the Match button or by pressing and holding the button
Applications
This dimmer meets the needs of commercial and hospitality projects (bedrooms, meeting rooms, restaurants, shops) as well as residential renovation work, wherever simple manual adjustment needs to coexist with remote control. Its standard flush-mount format and direct mains connection make it quick to deploy for LED relamping projects, with no changes to the existing wiring.
