3.60m Workshop Linear LED Lighting Kit 196W 110lm/W
A 3.60 m x 0.88 m light line built from hexagonal system components: two rails of 120 cm bars connected by 44 cm bars, with T and X connectors. The assembly draws 196 W from a single power feed and delivers 21560 lm of cool white light, distributed along the full length of a workbench or shelving bay.
Technical details
- Power consumption: 196 W
- Total luminous flux: 21560 lm – 110 lm/W
- Color temperature: cool white 6000K - 8000K
- Power supply: 220 - 240V AC, direct connection
- Dimming: not available
- Protection rating: IP20
- Ceiling footprint: 360 x 88 cm
- Circuits: 1 power feed
- Material: polycarbonate
- CE & RoHS marking – 2-year warranty
Kit contents
- 9 120 cm, 16W LED bars
- 8 44 cm, 6.5W LED bars
- 4 L connectors (90°)
- 6 T connectors (3 branches)
- 2 X connectors (4 branches)
- 1 power cable
- 1 disassembly tool for hexagonal strip light
Features
The T connectors hold the edge spacers, the X connectors hold the intermediate spacers that cross the line, and the L connectors close the four corners. The ladder-shaped structure is rigid and self-supporting between mounting points. At 110 lm/W, the line illuminates a 3.60 m work surface evenly along its length, without the gaps between adjacent strip lights.
Installation
Dedicated 196 W circuit. Mark the line centerline on the ceiling, aligned with the centerline of the bench or aisle. Install the first complete rail, insert the spacers into the T and X connectors, then close with the second rail. Secure the assembly, then connect the power cable after isolating the circuit. Recommended installation height: 2.50 to 3 m above a bench, higher above an aisle. Disassembly tool included.
Where should you use this linear lighting kit?
Mechanical or woodworking bench, inspection pit, shelving bay, laboratory bench, packaging line. Dry indoor locations only.
