U-Shaped Single-Phase LED Track Kit + 14 White GU10 Spotlights - 800 cm
Eight meters of track in three sections and fourteen adjustable heads: this U-shaped configuration covers a full run or goes around a sales floor. Connectors, end caps and mounts are included, removing the risk of installation delays caused by a missing accessory.
What's included
- 3 white 2 m single-phase tracks
- 2 white 1 m single-phase tracks
- 2 white single-phase straight connectors
- 2 white single-phase 90° corner connectors
- 14 white adjustable spot holders
- 14 GU10 9,5 W LED lamps (880 lm), supplied in the ordered color temperature
- Screws, ceiling mounts and track end caps included
Each track section comes with its power connector and end caps: no additional accessories are needed to power the track.
Technical details
- Total power: 133 W (14 x 9,5 W)
- Total luminous flux: 12320 lm (14 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 798W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 80°
- Color rendering: Ra 80
- Protection rating: IP20 (dry rooms)
- Total track length: 800 cm
- Lamp lifetime: ~25000h
- Lamp energy rating: F
- Class I — CE & RoHs certification — 2-year warranty
Features
The single-phase track puts all the fixtures on one circuit: the entire line switches on and off from a single control point. This is the fastest configuration to connect when the electrical panel has only one lighting circuit.
The 14 holders are adjustable: each head swivels and tilts to direct the beam towards a façade, display stand or work surface. They slide freely along the entire length of the track, allowing them to be repositioned without tools when the merchandise display changes.
The supplied GU10 bulbs can be replaced like standard bulbs: the installation’s color temperature or power level can be changed without replacing the holders or track. Replacing individual bulbs limits the spare parts that need to be kept on site.
Please note: the supplied bulbs are not dimmable. To adjust the brightness, replace them with dimmable GU10 bulbs and a compatible dimmer — the track and holders stay in place.
Installation
The track is surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections are connected using the included connectors, then the track is connected to the 220 - 240V mains using the power connector supplied with the track.
LInstallation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the electrical panel before making any connections and check earth continuity: the assembly is Class I.
Where should you use this track lighting kit?
Sales floors, showrooms, exhibition halls and workshops: the U-shaped loop illuminates an entire area from a single power connection. Check the distribution of illuminance levels against NF EN 12464-1 when the installation serves permanent workstations.