6W fire-rated, low-energy-building recessed spotlight, CCT dimmable, IP65, satin nickel trim
6 W LED downlight with integrated driver, designed for ceilings requiring fire resistance, airtightness and the ability to be covered with insulation: timber-frame houses, converted roof spaces, separating floors in apartment buildings, low-energy buildings. Color temperature adjustable on site, TRIAC dimming, IP65 front face for wet rooms. Satin nickel trim with a brushed matte finish that matches the stainless steel hardware in reception areas.
Technical details
6 W at 220-240 V AC, 600 lm output at 4000 K and 540 lm at 3000 K and 6500 K (efficiency up to 100 lm/W), CRI Ra 80, 60° beam angle, power factor above 0.7. Dimensions ø 86 × 46 mm, ceiling cutout ø 53 to 70 mm. Steel and polycarbonate body, satin nickel ABS trim. IP65 protection on the front face, IP5X on the ceiling side. Connection via 2 × 0.75 mm² cable. CE marked, 3-year warranty.
Features
Three-position CCT selector (3000 / 4000 / 6500 K), accessible before installation, allowing an entire batch to be set uniformly on site without managing three product references. Flicker-free DOB driver (Driver On Board: conversion electronics mounted directly on the LED board), compatible with TRIAC phase-cut dimmers. Luminaire can be covered with insulation and is fire-rated: 30 and 90 min on I-joists, 30, 60 and 90 min on solid timber joists, 30 min on metal-web joists.
Low-energy building (BBC) spotlight: enclosed rear housing, IP5X rating on the ceiling side. The luminaire is airtight and creates no leaks through the cutout, preserving the continuity of the ceiling's airtight barrier, which is checked during airtightness tests.
Installation
Cutout ø 53 to 70 mm, direct connection to 230 V in a junction box or on a terminal block, no remote power supply. Select the color temperature, then fit using retaining springs. The wide cutout range covers existing holes when renovating. In wet areas, observe the zones specified by NF C 15-100: the IP65 face allows installation in zone 2 and outside the zones, but not above the bathtub or in the shower.
Professional applications
Apartment buildings and individual timber-frame houses (fire-rated floors), new or renovated low-energy homes with insulated roof spaces, hotel and residential bathroom facilities, offices, corridors and passageways, local shops. One model with adjustable color temperature for all ceilings in a project.
