Recessed Spotlight 5.4W Dimmable CCT IP65 ALU RE2020 - 3000K/4000K/6000K

5.4W CCT aluminum IP65 RE2020 recessed LED spotlight, insulation-coverable

Designed for construction projects subject to RE 2020, this aluminum-trimmed spotlight delivers 600 lumens while consuming 5.4W, for an efficacy of 111 lm/W. Its insulation-coverable design allows direct installation beneath glass or rock wool without a protective enclosure, and its integrated connection terminal block maintains the airtightness of the wall. Three selectable color temperatures let you use the same product in areas with different requirements.

Technical details

• Power 5.4W — 600 lm output — luminous efficacy 111 lm/W
• Switchable CCT 3000K / 4000K / 6000K — CRI Ra 80
• 40° beam angle — IP65 — Class II (double insulation, no protective conductor)
• 220-240V 50-60Hz power supply — dimmable — ~50000h lifespan
• Ø8.05 x 4.95 cm — Ø60 mm cutout — aluminum and ABS body

Features

• Can be covered with insulation: complies with insulation continuity requirements for RE 2020 construction
• Connection terminal block included, no terminal strip or additional connector needed
• Built-in CCT switch: one product in stock for corridors, offices and wet areas
• Dimmable with a compatible dimmer, for dimming scenarios and energy management

Installation

Isolate the circuit before starting work. Drill a Ø60 mm hole in the suspended ceiling or plasterboard, connect the wires to the terminal block, select the color temperature, then insert the springs and clip the fixture into place. Wiring must comply with NF C 15-100. No clearance is required above the fixture thanks to its insulation-coverable design.

Where to use this spotlight?

• New homes and renovations subject to RE 2020, insulated ceilings
• Wet areas: bathrooms, restrooms, commercial kitchens (zone 2, depending on location)
• Commercial premises: offices, corridors, stairwells, reception areas
• Retail, hospitality and food service, where illuminance levels are determined according to NF EN 12464-1