Single-Phase LED Track Kit + 4 White GU10 Spotlights - 200 cm
A two-meter track, four adjustable heads and the corresponding four GU10 bulbs: this reference includes everything needed to equip one bay. Just one product code to enter when ordering, one package to receive, and no accessories to source when installing.
What's included
- 1 white 2 m single-phase track
- 4 white adjustable spotlight holders
- 4 GU10 9.5 W LED bulbs (880 lm), supplied in the selected color temperature
- Screws, ceiling mounts and track end caps included
Each track section comes with its power connector and end caps: no additional accessories need to be provided to power the track.
Technical details
- Total power: 38 W (4 x 9.5 W)
- Total luminous flux: 3520 lm (4 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 266W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 80°
- Color rendering: Ra 80
- Protection rating: IP20 (dry indoor areas)
- Total track length: 200 cm
- Bulb lifespan: ~25000h
- Energy class of the bulbs: F
- Class I — CE & RoHS certification — 2-year warranty
Features
The single-phase track groups all fixtures on one circuit: the entire line turns on and off from a single control point. This is the quickest setup to connect when the electrical panel has only one lighting circuit.
The 4 holders are adjustable: each head swivels and tilts to direct the beam towards a wall, display or work surface. They slide freely along the entire length of the track, allowing you to reposition them without tools when changing the merchandising layout.
The supplied GU10 bulbs can be replaced like standard bulbs: the installation’s color temperature or power level can be changed without replacing the holders or track. Replacing individual bulbs limits the spare parts that need to be kept on site.
Please note: the supplied bulbs are not dimmable. To adjust the light intensity, replace them with dimmable GU10 bulbs and a compatible dimmer—the track and holders can stay in place.
Installation
The track is surface-mounted on the ceiling or wall using the supplied screws. The sections are joined with the included connectors, then the track is connected to the 220 - 240V mains using the power connector supplied with the track.
L’installation must be carried out by a qualified electrician in compliance with NF C 15-100. Switch off the power at the electrical panel before making any connections and check the continuity of the earth connection: the system is Class I.
Where should you use this track lighting kit?
Local shops, agencies, meeting rooms and partitioned offices: anywhere a control point already exists on the ceiling and recessed installation is not an option. The two-metre track covers a standard bay and helps compensate for insufficient light levels without modifying the existing ceiling.
