Product description
The 10M Dynamic Effect LED Strip 120LED/m 24V 10W/m + 12-24V RF Controller for LED Strip: LED lighting reinvented for a personalized, dynamic atmosphere.
The benefits of the strip
24V LED strips are revolutionizing indoor lighting. Easy to install and versatile, they let you create unique atmospheres in every space while ensuring minimal energy consumption.
How do you install it?
To install the LED strip, a 24V LED strip transformer is essential. This component ensures the electrical voltage is converted correctly, guaranteeing the strip works properly and safely. 24V LED strip connectors are also available to make it easier to assemble and extend LED strips.
Where should you install it?
24V LED strips are ideal for lighting display cases, worktops, or walkways. Their flexibility allows for creative installation in both commercial and residential spaces.
Trust Silumen, your lighting partner
At Silumen, we are proud to offer high-quality LED lighting solutions, such as 24V LED strips. Our products are designed to meet all your lighting needs with style and efficiency.
Technical specifications
Light source
| Power | 100W |
| Luminous efficacy | 95 lm/W |
| Luminous flux | 9500 lm |
| Colour temperature | Blanc Neutre (4000K - 5500K) |
| LED type | SMD 2835 |
| LEDs per metre | 120 LED/m |
| Beam angle | 120° |
| Dimmable | Oui |
| No. of bulbs | 1200 LEDs |
Electrical
| Voltage | 24V |
| Current type | DC |
| Energy class | F |
Dimensions
| Dimensions | 0,8 x 0,3 cm |
| Length | 1000 cm |
| Width | 0,8 cm |
| Thickness | 0,3 cm |
| Cuttable | 12,5 cm |
Installation
| Ingress protection | IP20 |
| Dimmer | Oui |
Product
| Certifications | CE & RoHs |
| Warranty | 2 ans |
| Lifespan | ~25 000h |
Downloads
Find all the technical documentation and the declaration of conformity for this product.
Technical documentation (2)
Compliance (1)
Complete your order
Accessories and products compatible with this item.
Similar products
Our customers also liked these products.
Discover the alternative
Our LED strips for professionals: superior performance, guaranteed reliability





Explore related categories11
Browse the ranges this product belongs to.
Questions & answers8
Our technical team answers our customers' questions.
Thank you, your question has been sent.
Our technical team will reply by email.
How many wires are needed to connect and power this dynamic LED strip?
The strip connects with 3 wires: the +24V, the negative, and a signal wire that carries the chasing effect. This third wire must always be extended when joining two sections together.
Answer from the Silumen technical team · 02/11/2026
Can the dynamic LED strip be cut into two sections and joined with wires while keeping the chasing effect across the full length?
Yes, you can cut the strip at the designated cut points, then join the two sections with a wire extension, following the direction of the arrows printed on the strip and connecting each wire to its corresponding counterpart. The chasing effect is maintained across the full 10 metres without restarting, provided you use wire of at least 0.75 mm² and keep the extension to a few metres to avoid signal degradation.
Answer from the Silumen technical team · 02/11/2026
Which 24V driver should I choose to power two LED strips of 100W each?
For a total load of approximately 200 W, it is recommended to allow a 20% margin and use a 24V driver rated at least 250 to 300 W. A single correctly rated driver can power both strips.
Answer from the Silumen technical team · 27/10/2026
How can I control two LED strips with a single RF controller without overloading it?
A standard RF controller may be exceeded in terms of current when two strips are connected. The recommended solution is to use a signal amplifier alongside the controller: the controller drives the first strip while the amplifier relays the signal to the second strip without overloading the controller.
Answer from the Silumen technical team · 27/10/2026
Which driver is compatible with the 10 m dynamic effect LED strip 24 V 10 W/m with RF controller?
To power this 10 m LED strip at 24 V, we recommend the 220 V / 24 V 150 W DC 6.25 A driver available on our website.
Answer from the Silumen technical team · 27/10/2026
Can the 10 m 24V dynamic LED strip be cut to create two circuits of different lengths?
This 10 m 24V dynamic LED strip can be cut to size to create two separate circuits, provided the designated cut points on the strip are observed. Both circuits can then be powered by a single suitably rated 24V driver.
Answer from the Silumen technical team · 27/10/2026
Is a 24V dynamic LED strip with an RF controller compatible with presence detection switches?
Yes, the 24V dynamic LED strip with its RF controller is compatible with presence detection switches that control the power supply.
Answer from the Silumen technical team · 27/10/2026
Is an amplifier needed for a 24V dynamic LED strip of 10 metres?
For a length of 10 metres, no amplifier is required. Beyond this length, the addition of an amplifier is necessary.
Answer from the Silumen technical team · 27/10/2026
No question matches your search.
Recently viewed
Products you viewed recently.













