What is a smart thermostatic head and why fit one to my radiator?
A smart thermostatic head is an intelligent device that lets you control and regulate the temperature of your radiators remotely via a mobile app. With this technology, you can adjust the heat in each room of your home to suit your specific needs and schedule. Installing a smart thermostatic head has many benefits: optimised energy consumption, lower heating bills and improved thermal comfort in your home.


A smart thermostatic head must be installed correctly to perform at its best. Precise installation ensures smooth communication between the thermostatic head and the heating system, maximising energy savings and comfort. Incorrect installation could lead to malfunctions and reduce the device's effectiveness.
What to prepare before installation
Before installing a smart thermostatic head, it is essential to prepare properly. This includes identifying the type of valve on your radiator, checking the compatibility of the thermostatic valve bodies and getting the necessary equipment ready for a safe installation.
Find out whether the radiator has a manual valve or a thermostatic valve
To begin with, it is crucial to determine whether your radiator is fitted with a manual valve or a thermostatic valve. A manual valve is fixed directly to the radiator body and lets you adjust the flow of hot water by hand. These valves are not graduated and usually show "+" and "-" signs to indicate the settings. A thermostatic valve, on the other hand, manages the temperature automatically. It is graduated from 1 to 5, giving more precise and efficient control of the heat given off by the radiator. It is important to note that smart thermostatic heads are not compatible with radiators fitted with manual valves.


Identify the model of the radiator's thermostatic valve
Once you have confirmed that there is a thermostatic valve, the next step is to identify the specific valve type on your radiator. This is crucial to ensure compatibility with Silumen smart thermostatic heads.
Compatible thermostatic valve bodies include Danfoss RAVL, Danfoss RAV, Danfoss RA, M30 x 1.5mm, M28 x 1.5mm, Giacomini and Caleffi.
Adapters for all these types of valve bodies are supplied with the smart thermostatic head. It fits directly onto the M30 x 1.5mm connector without an adapter.
Equipment needed to install the smart thermostatic head
Once you have established that your radiator has a valve body compatible with Silumen smart thermostatic heads, it is time to get the equipment ready for installation. Here is what you will need:
- A Silumen smart thermostatic head
- A Zigbee gateway (needed to control the heating remotely)
- Two AA/LR6 batteries
- A screwdriver
- Slip-joint pliers
- The free Silumen Home app installed on a smartphone
For a safe installation, make sure you shut off the water supply to the radiator and let it cool down before you start.
Steps for installing Silumen smart thermostatic heads
Installing a Silumen smart thermostatic head is a relatively simple job that can greatly improve the way you manage your heating. Here are the detailed steps for a successful installation.
Remove the old thermostatic valve head
First, if your radiator already has a thermostatic valve head, you need to remove it without damaging the radiator. Here is how:
- Shut off the water supply to the radiator: make sure the radiator has cooled down completely before you start.
- Loosen the valve nut: use pliers to loosen the nut that holds the valve head on the radiator. Turn slowly to avoid damaging the threads.
- Remove the valve head: once the nut is loose, gently pull the valve head to detach it from the radiator. Remember to place a container under the radiator to catch any residual water.
- Clean the threads: before fitting the new head, carefully clean the threads to remove any residue.
Install the TV01 smart thermostatic head
Before fitting it to the radiator, you need to set up the Silumen TV01 thermostatic head as follows:




Fitting it to the radiator is done as follows:



To control your radiator from your smartphone with our free Silumen Home app, you need to pair the thermostatic head with a Zigbee gateway (if your Zigbee gateway is not yet set up in Silumen Home, please follow the detailed steps in our dedicated guide):




Install the TV02 smart thermostatic head
Here are the setup and installation steps for the Silumen TV02 thermostatic head:






Tips and best practices
Optimising energy consumption
Using a smart thermostatic head to its full potential can maximise your energy savings. Here is how:
- Data analysis: use the Silumen Home app to monitor your energy consumption. The data collected can help you identify when your consumption is highest and adjust your settings accordingly.
- Room-by-room temperature settings: adapt the temperature of each room to how it is used. For example, set bedrooms to a lower temperature during the day and only raise the bathroom temperature when it is in use.
- Radiator without a thermostatic head: leave at least one radiator without a thermostatic head, ideally the one closest to the boiler, to avoid overpressure in the system if all the valves close at the same time.
- Thermostat position: avoid fitting a thermostatic head to the radiator near the room thermostat, so as not to disrupt the central control.
- Avoid external influences: make sure the thermostatic head's sensor is not affected by external heat sources such as electrical appliances or sunny windows. This prevents the valve from closing too early.
Maintenance and care
Regular maintenance is essential to keep your Silumen smart thermostatic head working properly. Here are a few tips:
- Regular cleaning: wipe the thermostatic head with a soft cloth to remove dust and dirt. Avoid harsh chemicals that could damage the components.
- Battery check: replace the batteries every 6 to 12 months to ensure continuous performance. If the display becomes faint or the head stops responding properly, the batteries probably need replacing.
- Annual calibration: carry out an annual calibration to keep temperature control accurate.
- Handling malfunctions: if a technical problem occurs, refer to the user manual for common solutions. If the problem persists, contact Silumen customer service for specialist assistance.
Error codes: troubleshooting and maintenance
| Error code | Problem | Solution |
|---|---|---|
| F0 | Temperature sensor fault | Contact customer service |
| F1 | Valve operation too slow | Check the installation and the valve heating |
| F2 | Contact travel too long | Check that the head is properly fixed |
| F3 | Contact travel too short | Check the heating valve |
| F4 | Battery exhausted | Replace the batteries immediately |
| F5 | Valve not detected | Check whether the valve is installed |
| Battery | Low battery | Replace the batteries within a week |



