5M 24V IP20 320LED/m COB LED Strip - Blue
A straight, continuous blue line spanning several meters requires a high enough LED density that the individual light sources are no longer visible. With 320 chips per meter embedded under resin, this reel meets that requirement along its full 5-meter length, with no change in intensity from the start to the end of the line.
Technical details
- 320 LEDs/m, COB technology — 1600 chips per reel
- Power: 8 W/m, 40 W over 5 m
- Total output 3600 lm — 720 lm/m — 90 lm/W
- Incandescent equivalent: 400 W
- Voltage: 24V DC (SELV)
- 120° beam angle — Ra 80 — dimmer compatible
- IP20, for dry indoor use
- 500 x 0.79 cm — cut every 5 cm
- -20°C to +50°C — ~25000h — CE & RoHs — 2-year warranty
Features
The 24V extra-low voltage allows longer cable runs than an equivalent 12V strip using the same cable gauge, as the relative voltage drop is halved. This is the key factor when planning wiring for long runs.
Dimming is controlled by a 24V PWM dimmer upstream of the strip. Since monochromatic blue does not undergo any phosphor conversion, its hue remains stable at any dimming level.
Installation
After isolating the power supply, provide a 24V transformer rated for at least 48 W for the full reel. For runs longer than 5 meters, do not connect sections in series: power them in parallel from the transformer, or feed power at both ends. The cable between the transformer and the first section must be sized according to its length.
Attach using the integrated adhesive to a prepared surface, or insert into an aluminum profile with an opal diffuser to further smooth the light and protect the circuit. Cut only at the markings, every 5 cm.
Where can you use this LED strip?
Hotel hall coves, underside of the reception desk, counter cladding, display window or demonstration area lighting, or nighttime corridor lighting in public buildings. For areas exposed to moisture, specify an IP65 or IP67 model.
