COB LED Strip 5M 24V IP20 320LED/m - Red
Designed for installers who need to create a uniform red line in a cornice, cove or profile, this 5-meter reel features 320 chips per meter beneath a diffusing resin. The result is a continuous line with no visible dots, even from less than 30 cm away from the illuminated surface.
Technical details
- COB technology (Chip On Board) — 320 LEDs/m, or 1600 chips per reel
- Power: 8 W/m — 40 W for 5 m
- Luminous flux: 3600 lm, or 720 lm/m — efficacy 90 lm/W
- Incandescent equivalent: 400 W
- Power supply: 24V DC (SELV), transformer not included
- Beam angle: 120° — CRI Ra 80
- IP20: dry locations only, outside the zones defined by NF C 15-100 for bathrooms
- Dimensions: 500 x 0.79 cm — cut interval 5 cm
- Operating range: -20°C to +50°C — lifespan ~25000h
- CE & RoHs — 2-year warranty
Features
The red light is emitted directly by the chip, without a filter: no color shift over time or loss of efficiency due to filtering. The strip supports dimming with a 24V PWM (Pulse Width Modulation, high-frequency switching of the current) dimmer and is compatible with standard control modules used in commercial electrical panels.
Operation at safety extra-low voltage (SELV) means no special protection against direct contact is needed on the 24V side; protection is provided upstream of the transformer.
Installation
Isolate the circuit before carrying out any work. Size the transformer at 1.2 times the installed power, i.e. at least 48 W for a full reel. When more than 5 meters are powered from a single point, voltage drop at the end of the line becomes noticeable: use dual-end power injection or star wiring from the power supply, with a conductor cross-section suited to the cable length.
Install on a clean, degreased surface using the integrated adhesive, or in an aluminum profile when heat dissipation and mechanical stability need to be ensured over time. Cut only at the marked points, every 5 cm.
Where can you use this LED strip?
Control rooms and monitoring stations where red lighting preserves operators' night vision, technical traffic marking, shop displays, bar cornices or event spaces. For damp locations or outdoor use, direct the specifier to an IP65 or IP67-rated product.
