RGBW RF Controller & Remote for 12-24V Strip

Control an RGBW LED strip setup with this mini-controller and its 40-button infrared remote. Compatible with most 12V and 24V strips, it offers 20 preprogrammed colors, 4 dynamic modes, and 4-level dimming to create lighting atmospheres suited for every use.

Technical Details

Input and output voltage 12-24V DC. Maximum current 8A per output (2A per channel). Supported power 96W at 12V, 192W at 24V. 4 independent color channels (Red, Green, Blue, White). IP20 rating for dry indoor use. 5.5/2.1 mm DC jack connector on input.

Features

The infrared remote offers 20 directly accessible preprogrammed colors, 4 dynamic modes (Flash, Strobe, Fade, Smooth), and 4 brightness levels (25%, 50%, 75%, 100%). The white and color channels can be controlled simultaneously or independently. IR remote range: 5 to 8 meters in direct line of sight. CR2025 battery included.

Installation

Place the controller between the 12-24V DC power supply and the RGBW LED strip (5 wires: V+, R, G, B, W). Connect the power supply to the input DC jack, then connect the strip to the 4 screw terminals following the color code. Point the remote at the controller’s infrared receiver to operate the setup.

Where to Use This RGBW Controller?

Indirect ceiling or cornice lighting, highlighting furniture, bookshelves, kitchens, living room atmospheres, bedrooms, home theaters, commercial displays, event scenography. Compatible with the vast majority of 12V and 24V RGBW LED strips on the market.