18W IP67 recessed ground light for facade lighting
1572 lumens from a 180 mm recessed ground light: the highest output in the series, designed for projects where a single light needs to illuminate the full height of a structure. The efficacy of 87 lm/W and 20 cm cable tail also make line calculations and connections at the bottom of the excavation easier.
Technical details
- Power consumption 18W, luminous flux 1572 lm, efficacy 87 lm/W
- Direct connection 220-240V, 50-60 Hz, non-isolated driver
- Class I, earth connection required in accordance with NF C 15-100
- IP67 rating, permissible ambient temperature from -20 °C to +40 °C
- 30° beam angle, CRI Ra 80, non-dimmable
- Overall dimensions ø 18 x 8.9 cm, cut-out ø 14.8 cm, 20 cm cable tail
- Stainless steel, aluminium and PP body, L70B10 service life of approximately 30,000 hours
- CE compliant with directives 2014/35/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU, EU 2019/2020 and EU 2019/2015
Features
The overall diameter of 180 mm does not mean the recess needs to be the same size: the cut-out is 148 mm and the height is 8.9 cm, the same as the 12W model. This allows both power ratings to be combined in one project using a shared excavation depth. The stainless-steel rim covers variations in the paving cut. Non-dimmable model; do not connect to a dimmable circuit.
Installation
Switch off and isolate the power supply. Prepare the recess, feed the cable through the installation housing, then seal the housing into the ground with drainage at the bottom of the excavation. Connect the inner body to the power cable, including the earth wire, insert it into the housing, refit the top section and check that the whole assembly is securely fixed before restoring power. The housing must be properly sealed before use, and the light must not be subjected to mechanical shocks that could compromise its IP67 rating.
Where should you use this recessed ground light?
Facade and gable lighting, highlighting large trees, gates and property entrances, forecourts and large terraces. Recessed installation in the ground outdoors only, not for permanent immersion or areas where water can collect.
