Ten Ø64 ground marker lights at 1 W each for low-energy pathway lighting
For an outdoor pathway lighting project, the number of lights quickly exceeds ten, and the combined power affects circuit sizing. This pack contains ten 1 W recessed ground lights: 10 W in total to illuminate a complete pathway, with a single product reference to order and the same light color throughout the pack.
Technical details
Power per light: 1 W, luminous flux of 79 lm per light (79 lm/W, equivalent to an 8 W incandescent bulb), totaling 790 lm for the pack. Mains supply 220 - 240V, alternating current 50/60 Hz, with no remote driver. 30° beam, IP67 rating (complete protection against dust and temporary immersion), Class I fixture with protective earth conductor required. Dimensions: Ø 6,4 cm, with an installation depth of 7,4 cm; silver-colored stainless steel housing. Rated lifespan ~30000 h, energy class G, CE & RoHs compliance, 2-year warranty.
Features
At 1 W per light, the load remains negligible even along a long run: the power calculation allows numerous marker lights to be connected to an existing outdoor circuit. The narrow 30° beam prevents glare for users and stray light toward façades. The pack is supplied in a single color temperature of your choice (2300K - 3500K, 4000K - 5500K or 6000K - 8000K), ensuring visual consistency throughout the pathway lighting. Not dimmable: do not install a dimmer on the circuit.
Installation
First, plan the layout of the ten lights and choose the spacing, then isolate the circuit before starting work. Drill holes Ø 6,4 cm, leaving extra depth for a gravel drainage bed beneath each fixture, as IP67 protection does not cover prolonged pooling. Run the power cable through conduit suitable for outdoor use, use waterproof connections, connect the live, neutral and earth wires, then fit the lights flush with the surface. Check earth continuity at every point during commissioning; installation must be carried out by a qualified electrician.
Where should you install this pack?
Pedestrian pathways in residential properties and condominiums, around hotels and restaurants, along parking lot edges, on outdoor steps at public-access buildings, and around pools and terraces at business premises. For outdoor installation only, recessed into the ground, outside areas of permanent immersion.
