Product description
Set of 10 8W CCT recessed spotlights to equip an entire area. Ten identical spotlights, supplied together, for a consistent layout across an open-plan office, corridor or commercial premises.
Pack of 10 dimmable 8W CCT recessed LED spotlights
Set of 10 | 4 color temperatures | White finish | Dimmable | UGR<19 | 90-95 mm cutout
This pack of 10 dimmable 8W CCT recessed LED spotlights provides everything needed to illuminate an entire area in one order: 6,800 lumens in total for 80W installed. Each spotlight, 103 mm in diameter and 85 mm high, offers identical color temperature adjustment and dimming, ensuring uniform light throughout the set.
Why order a pack of 10
Consistent layout
All ten recessed LED spotlights share the same cutout, connection and color temperature switch (3000K, 4000K, 5000K or 5700K). Installation is repeated in the same way at each point, and commissioning can be completed in a single pass.
Visual comfort and efficiency
With 680 lumens per spotlight at 85 lm/W, a 60° beam angle, CRI Ra 80 and UGR below 19, this set is suitable for workstations. Connected to a compatible LED lighting dimmer, it adjusts to room occupancy levels.
White finish
The pack is available in a white finish, discreet against light-colored ceilings.
Series installation
Wire the circuit, make ten cutouts of 90 to 95 mm, allowing for an installation height of 85 mm, set the color temperature on each switch, connect to 220-240V, then insert each spotlight with the cables first and release its springs. The visible face is IP44; the rear of the sealed housing is IP5X (airtight): do not cover with insulation. 3-year warranty on each spotlight.
Technical specifications
Light source
| Power | 8W |
| Luminous efficacy | 85 lm/W |
| Luminous flux | 680 lm |
| Colour temperature | CCT |
| LED type | SMD 2835 |
| IRC | Ra 80 |
| UGR | UGR<19 |
| Incandescent equiv. | 68W |
| Beam angle | 60° |
| Dimmable | Oui |
Electrical
| Voltage | 220 - 240V |
| Current type | AC |
| Frequency | 50-60Hz |
| Energy class | G |
Dimensions
| Dimensions | ø 10,3 x 10,3 x 8,5 cm |
| Length | 10,3 cm |
| Width | 10,3 cm |
| Thickness | 8,5 cm |
| Depth / Height | 85 mm |
| Diameter | ø 10,3 cm |
| Cut-out diameter | 9 à 9,5 cm |
Installation
| Installation type | À encastrer |
| Ingress protection | IP44 |
| Dimmer | Oui |
| Adjustable | Non |
| Recessed | Oui |
Product
| Colour | Blanc |
| Luminaire shape | Rond |
| Materials | Aluminium Plastique ABS |
| Certifications | CE & RoHs |
| Warranty | 3 ans |
| Packaging | 10 |
| Operating temp. | -30°C à +50°C |
Downloads
Find all the technical documentation and the declaration of conformity for this product.
Technical documentation (2)
Compliance (1)
Complete your order
Accessories and products compatible with this item.
Similar products
Our customers also liked these products.
Range CCT PRO · ORIA
Complete your installation with products from the same rangeExplore related categories14
Browse the ranges this product belongs to.
Questions & answers4
Our technical team answers our customers' questions.
Thank you, your question has been sent.
Our technical team will reply by email.
Quelles sont les caractéristiques du spot encastrable 9W CCT IP44 blanc ?
Ce spot délivre 720 lumens et propose trois températures de couleur : blanc chaud 3000 K, blanc neutre 4000 K ou blanc froid 6500 K. Il est également dimmable, ce qui permet d'adapter l'intensité lumineuse selon les activités.
Answer from the Silumen technical team · 27/10/2026
Peut-on recouvrir ce spot d'isolant en combles ?
Non, il est déconseillé de recouvrir le spot d'isolant afin de préserver sa durée de vie, même si l'arrière du boîtier est étanche à l'air (IP5X). Prévoyez un dispositif de protection adapté si votre chantier impose une isolation en contact direct avec le luminaire.
Answer from the Silumen technical team
Peut-on installer ces spots dans une salle de bains ?
La face visible de chaque spot est classée IP44, ce qui autorise l'installation dans les zones où des projections d'eau sont possibles, sous réserve de respecter les volumes réglementaires définis par la norme NF C 15-100. L'arrière du boîtier est classé IP5X (étanche à l'air) ; il ne doit pas être recouvert d'isolant thermique.
Answer from the Silumen technical team
Quelle hauteur de plénum faut-il prévoir au-dessus du faux plafond ?
Chaque spot nécessite une hauteur d'intégration de 85 mm au-dessus de la surface du faux plafond. Prévoyez également une découpe de 90 à 95 mm de diamètre pour chacun des dix emplacements.
Answer from the Silumen technical team
No question matches your search.
Recently viewed
Products you viewed recently.

















