Double Flush-Mounted Wall Switch 10A - Matte Black

Double version of the Pearl module: two independent toggle buttons combined on a single flush-mounted plate, allowing control of two separate circuits from the same wall location. Its matte black finish blends discreetly into clean, contemporary decor.

Technical Specifications

Powered at 250V / 50Hz with a nominal current of 10A per switch. The module fits flush in an 81 x 81 x 14 mm format with an IP20 rating for dry indoor use. It requires a flush box at least 27 mm deep. The push-in terminals accept rigid or flexible conductors from 0.75 to 2.5 mm².

Product Benefits

Two independent square buttons are integrated on the same plate, each controlling a specific circuit. This layout is especially practical for separating general lighting from accent lighting, controlling a chandelier and wall sconces separately, or dividing a main zone from a secondary zone. This module is fully compatible with Pearl modular frames from 1 to 5 gang, allowing for extended combinations: double switch + outlet, double switch + two-way switch, and many other configurations.

Installation

Insert the mechanism into a standard flush box at least 27 mm deep. Then make the two independent phase-shuttle connections, each to its own circuit, via the dedicated push-in terminals. Secure the module with self-retracting claws or screws depending on the box type. Finish by clipping on the Pearl outer frame and then the two matte black square buttons onto the mechanism.

Recommended Applications

This double switch suits any room requiring control of two lighting zones: living room (main lighting + decorative sconces), bedroom (ceiling light + bedside reading lights), kitchen (ceiling + under-cabinet lighting), bathroom (ceiling + mirror lighting), or entryway (indoor + outdoor lighting). One plate for two functions, providing a cleaner and more organized wall layout. Product guaranteed for 2 years.